Quick Answer
Before calling a technician, check the power connection, circuit breaker, door or lid switches, and any visible error codes — these five quick checks resolve a surprising number of 'broken' appliances at no cost.
Many appliances have a safety switch that prevents operation if a door isn't fully closed — this is one of the most overlooked causes of a 'dead' appliance.
Before assuming the worst, it's worth running through a few free, no-tools-needed checks. A surprising number of appliance 'breakdowns' turn out to be something simple.
Here are five checks that take under five minutes and can save you an unnecessary call-out.
5 Quick Checks Before Calling a Technician
- Confirm the appliance is properly plugged in and the outlet works with another device
- Check the household circuit breaker or fuse box for a tripped switch
- Make sure any doors or lids are fully closed — many appliances have a safety interlock
- Look for an error code on the display and note it down
- Check if a reset (unplug for 60 seconds, then plug back in) resolves the issue
Why a Simple Reset Sometimes Works
Many modern appliances run on a small control board that can occasionally lock up after a power fluctuation, similar to a computer freezing. Unplugging for a minute and plugging back in clears this in some cases — though if the fault returns immediately, there's a genuine underlying issue.
When to Stop Troubleshooting and Call a Pro
If you've gone through these checks and the appliance still won't run, or you notice burning smells, sparking, or unusual heat from the unit, stop and call a licensed technician rather than continuing to test it.
Frequently Asked Questions
Why has my appliance suddenly stopped working with no warning?▼
Check the power connection, circuit breaker, and any door/lid safety switches first — these cause a large share of sudden 'no power' faults.
Does unplugging and resetting an appliance actually help?▼
Sometimes — it can clear a control board glitch. If the fault returns straight away, there's an underlying issue that needs diagnosis.
What error codes should I note down before calling a technician?▼
Any code shown on the display, even briefly. It helps the technician identify the fault faster and may reduce diagnosis time on site.
When is it unsafe to keep testing an appliance myself?▼
Stop immediately if you notice burning smells, sparking, smoke, or unusual heat — these require a licensed technician straight away.
We Service All Melbourne Eastern Suburbs
Same-day appliance repairs available across:
Need help with this right now?
Same-day service · Licensed technicians · 12-month labour warranty & 3-month parts warranty
Dishank Patel
Lead Technician & Founder · DP Electric Melbourne
Dishank Patel has over 10 years of hands-on experience repairing household appliances across Melbourne's eastern suburbs. He holds all required Victorian electrical and gas licensing and has personally repaired thousands of appliances across brands including Bosch, Miele, LG, Samsung, and Fisher & Paykel.